server or shortly -s - mining pool address (for example:, ) list_devices - list devices available for mining Three built-in LEDs illustrate the selected core voltage as follows:įor enhanced support please visit the public support forum on or write us an e-mail.-algo or shortly -a - mining algorithm (for example: -algo ethash, -algo etchash -algo kawpow, -algo cuckatoo32, -algo beamhash) Each time the black button is pressed, the core voltage can be increased by 10 mV. The miner is delivered with a core voltage preset of 390 mV. The core voltage of the Terminus R606 can be easily adjusted with a built-in circuit in eight steps from 390 mV to 460 mV. In addition to the clock rate adaptation, the core voltage can or must be modified so that the ASICs are optimally supplied with voltage at an increased clock rate.
#Cgminer setup software
Regardless of whether you use the script or call cgminer.exe directly: The mining software should be run with Windows 7 or higher with administrator rights. Replace the pool data with your own and save the script. Frequencies between 2 MHz have been approved for the R606.Īlternatively, the supplied test_mining.bat script can be adapted using a text editor. The clock rate can be changed by modifying the parameter gekko-r606-freq. The example above shows a Solo-Mining configuration in Con Kolivas’ Solo Mining pool. Please contact your pool operator or check the pool setup guide for more details. The Pool configuration which is used in the example above should be replaced by your own pool configuration data. The following command will start up the CGMiner Software (example): cgminer.exe -o stratum+tcp://:3333 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr -p x -suggest-diff 32 -gekko-r606-freq 600
#Cgminer setup driver
With Windows PowerShell you can check if the right driver has been installed: PS C:\> gwmi Win32_USBControllerDevice |% | sort Manufacturer,Description,DeviceID | ft -groupby Manufacturer Description,Service,DeviceId -auto Setup The following CMD command can be used to test if the Miner was correctly identified by the CGMiner Mining software: cgminer.exe -n Please note: After installation of Zadig USB driver tools, activate the List All Devices” option in “Options” menu if the Miner does not show up: In case of problems with the device detection, please try the Zadig WinUSB (libusb) driver:
#Cgminer setup windows 10
For Windows 7 and Windows 10 operating systems we recommend the use of Zadig USB driver & tools ( ). When plugged in, the Miner is registered in Windows Device Manager as “NewPac Bitcoin Miner”. The Terminus R606 requires a special branch of the mining tool CGMiner which is available for download here as a binary for Windows systems (recommended: Windows 7 or higher): Conventional PCs or mini PCs with Windows, Linux or Mac operating systems are suitable as controllers.
Terminus R606 miners are connected via the USB port. Setup, Software, Initialisation and Fine Tuning with Windows 7 or higher Required EquipmentĪn external controller is required to operate the miner.
0 kommentar(er)
